• head_banner_01

Manufacturer direct selling turnbuckle scaffold manufacturer

Short Description:


Product Detail

Product Tags

Product Description

>>>

The turnbuckle scaffold is a new type of scaffold, which was introduced from Europe in the 1980s. It is an upgraded product after the bowl buckle scaffold. It is also known as chrysanthemum disc scaffold system, plug-in disc scaffold system, wheel disc scaffold system, buckle disc scaffold, layer frame and Leia frame, because the basic principle of the scaffold is invented by layher company in Germany and is also called "Leia frame" by people in the industry. It is mainly used for lighting frame and background frame of large-scale concert.), The socket of this kind of scaffold is a disk with a diameter of 133mm and a thickness of 10mm. 8 holes are set on the disk φ 48 * 3.2mm, Q345A steel pipe is used as the main component. The vertical rod is welded with a disc every 0.60m on a certain length of steel pipe. This novel and beautiful disc is used to connect the cross rod with a connecting sleeve at the bottom. The cross bar is made of a plug with a pin welded on both ends of the steel pipe.

Scaffold is a working platform set up to ensure the smooth progress of each construction process. It is divided into external scaffold and internal scaffold according to the erection position; According to different materials, it can be divided into wood scaffold, bamboo scaffold and steel pipe scaffold; According to the structural form, it is divided into vertical pole scaffold, bridge scaffold, portal scaffold, suspended scaffold, hanging scaffold, cantilever scaffold and climbing scaffold. Scaffolds for different purposes shall be selected for different types of engineering construction. Most of the bridge supports use bowl buckle scaffolds, and some also use portal scaffolds. Most of the floor scaffolds for the construction of the main structure use fastener scaffolds, and the longitudinal distance of the scaffold poles is generally 1.2 ~ 1.8m; The transverse distance is generally 0.9 ~ 1.5m.

Compared with the general structure, the working conditions of scaffold have the following characteristics:

1. The load variation is large;

2. The fastener connection joint is semi-rigid, and the rigidity of the joint is related to the fastener quality and installation quality, and the performance of the joint varies greatly;

3. The scaffold structure and components have initial defects, such as initial bending and corrosion of members, large erection dimensional error, load eccentricity, etc;

4. The binding variation of the connection point with the wall to the scaffold is large. The research on the above problems lacks systematic accumulation and statistical data, and does not have the conditions for independent probability analysis. Therefore, the value of structural resistance multiplied by an adjustment coefficient less than 1 is determined by calibration with the previously adopted safety factor. Therefore, the design method adopted in this specification is semi probabilistic and semi empirical in essence. It is the basic condition for design and calculation that the scaffold meets the structural requirements specified in this specification.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Turnbuckle scaffold

      Turnbuckle scaffold

      Product Description >>> The turnbuckle scaffold is a new type of scaffold, which was introduced from Europe in the 1980s. It is an upgraded product after the bowl buckle scaffold. It is also known as chrysanthemum disc scaffold system, plug-in disc scaffold system, wheel disc scaffold system, buckle disc scaffold, layer frame and Leia frame, because the basic principle of the scaffold is invented by layh...

    • Steel support

      Steel support

      Product Description >>> 1. Introduction to adjustable steel support: The adjustable steel support (steel pillar) is composed of lower casing, upper intubation and adjustable device. The upper intubation is drilled with equally spaced bolt holes, The upper part of the casing is provided with an adjustable wire sleeve, which can flexibly adjust various heights of the column, and the installation is conveni...

    • Top support and bottom support

      Top support and bottom support

      Product Description >>> The scaffold specification stipulates that the extension length of the adjustable base and adjustable support screw of the full support frame shall not exceed (300) mm, and the length inserted into the vertical rod shall not be less than (150) mm. Jacking, an indispensable and important building tool in the process of scaffold erection and use, plays an important role. It plays th...

    • Aluminum template fastener

      Aluminum template fastener

      Product Description >>> Astener generally refers to the intermediate connecting part connecting two components, which is mostly used for external diameter in construction engineering Φ For the fixation of 48mm steel pipe scaffold, the fasteners are divided into right angle fasteners (cross fasteners and directional fasteners), rotary fasteners (movable fasteners and universal fasteners), butt fasteners (...

    • Building support, steel support

      Building support, steel support

      Product Description >>> 1. Introduction to adjustable steel support: The adjustable steel support (steel pillar) is composed of lower casing, upper intubation and adjustable device. The upper intubation is drilled with equally spaced bolt holes, The upper part of the casing is provided with an adjustable wire sleeve, which can flexibly adjust various heights of the column, and the installation is conveni...

    • Aluminum formwork pin architectural aluminum formwork pin

      Aluminum formwork pin architectural aluminum fo...

      Product Description >>> Product nickname: aluminum template pin, aluminum template pin, aluminum template pin Pin material: Q235 Pin material: Q235, 45# steel Pin specifications: 16 * 52, 16 * 54, 15 * 125, 16 * 140 (solid pin, imitation solid pin) Pin specification: 3 * 70 ribbed, 3.5 * 70 bent pin Surface treatment: natural color, galvanized, color plated Function of pin: it is used for assembly and co...